|
| |
TM 5-4320-306-24
3-13. REPLACE FUEL INJECTION PUMP (Continued)
4
Remove fuel injection pump (7) from crankcase (8).
5
Remove and discard preformed packing (9).
INSTALLATION:
1
Install new preformed packing (9) into crankcase (8).
2
Lubricate packing (9) with a light coat of lubricating oil.
3
Place fuel injection pump (7) over mounting studs (6). Make sure that preformed packing (9) seats
properly in crankcase (8).
4
Install four nuts (4) and four washers (5).
5
Place three washers (3) and three lockwashers (2) over three bolts (1). Place a light coat of grease on
these parts to hold them together during installation.
3-63
|
