|
| |
TM 5-4320-306-24
2-39. REPLACE FUEL TANK LINES AND FITTINGS
This task covers:
a.
Removal
d.
Bleeding
b.
Inspection
Fuel System
c.
Installation
INITIAL SETUP:
Tools
General Safety Instructions
Shop equipment, automotive maintenance
and repair, common no. 1
Engine cool.
Tool kit, general mechanics automotive
Well-ventilated area.
Personnel Required
Mechanic 44B20 (2)
REMOVAL:
WARNING
Death or serious injury could occur if diesel fuel oil is not handled
carefully. Use in a well-ventilated area away from open flame,
arcing equipment, ignition sources, heaters, or excessive heat.
Always store fuel in proper, marked containers. DO NOT SMOKE.
1
Remove engine side panel.
2
Loosen two hose clamps (1).
3
Tag and remove fuel line (fuel tank-to-3-way selector valve) (2).
4
Loosen and remove male connectors (3).
5
Loosen hose clamps (4).
6
Loosen and remove male connector (5) and-banjo bolt (6).
7
Tag and remove fuel line (3-way selector valve to fuel feed pump) (7).
2-135
|
