|
| |
TM 5-4320-306-24
2-36. REPLACE EXHAUST MANIFOLD AND SUCTION PIPE (Continued)
5 Slide intake manifold (18) end into rubber sleeve (21), and place intake manifold (18) on studs (17). Secure intake
manifold (18) with nuts (15) and washers (16).
6
Position rubber sleeve (21) so it is on each pipe end equally. Securely tighten hose clips (20) at each end of sleeve
(21).
7
Connect ether line to suction pipe (9).
8
Install compression rings (7) and assemble two exhaust pipes (13 and 18).
9
Install new mounting studs (12 and 17) in the engine block as required.
10 Place new gaskets (14 and 19) and the exhaust manifold (1) on studs (12 and 17), secure with nuts (10 and 15) and
washers (11 and 16).
11 Install exhaust pipe and exhaust elbow in accordance with paragraph 2-28.
12 Install turbocharger in accordance with paragraph 2-33.
2-129
|
