|
| |
TM 5-4320-305-24
2-16. REPLACE/REPAIR CONTROL PANEL ASSEMBLY (Continued)
1
Place left side of control box (37) in left opening of control panel(4) with right side of control box angled out 60
degrees toward trailer tongue. Fasten two plugs (38) on back of control box.
2
Connect two fluid hoses (39) at quick disconnects (40).
3
Position the right side of the control box (37) in control panel (4) and fasten wing nut (36) on right side of control
box.
4
Install charging indicator lamp (ALTERNATOR) (34) through front of control panel (4).
5
Install nut (35) at back of indicator lamp (34).
6
Attach two tagged wires.
7
Install PANEL LIGHTS switch (27) through back of control panel (4).
8
Install nut and spring lockwasher (28) on PANEL LIGHTS switch (27).
9
Attach six tagged wires to PANEL LIGHTS switch (27) with three screws.
2-63
|
