|
| |
TM 5-4320-305-24
2-16. REPLACE/REPAIR CONTROL PANEL ASSEMBLY (Continued)
TESTING/INSPECTION:
1
Test for continuity wires located in control box for following items: ENGINE OIL PRESSURE indicator, BATTERY
VOLTMETER, OIL BY-PASS SWITCH, START/STOP switch, STARTER switch, PANEL LIGHTS switch, and
panel lights. Test for continuity from the gage/instrument/switch wire end to the wire end connected to terminal
strip. Inspect for broken, burred, damaged, or frayed wiring. Replace damaged or defective wires.
2
If control box is damaged or defective, replace it.
3
Inspect control panel, control panel cover assembly, and control panel base plate assembly for cracks, rust,
corrosion, and for damaged or stripped threads. Check that identification and performance data plates are in place
and readable.
REPAIR:
1
Repair minor dents, rust, or corrosion on control panel, control panel cover assembly, and control panel base plate
assembly. If severely damaged, dented, rusted, or corroded, replace.
2
Replace identification and performance data plates as necessary.
INSTALLATION:
2-62
|
