|
| |
TM 5-4320-305-24
4-4. REPAIR INJECTION PUMP (Continued)
68 Apply a thin coat of sealing compound to new gasket
52).
69 Position housing (51) onto injection pump.
70 Install six lockwashers (50) and six screws (49).
torque screws to 52 to 69 in-lb (5.9 to 7.8 N.m).
71 Place woodruff key (27) in camshaft.
72 Push flyweight (26) firmly onto taper of camshaft.
73 Install lockwasher (25) and annular nut (24) onto
camshaft. Torque annular nut to 36 to 43 ft-lb (48.8 to
58.3 N-m) using flyweight pin wrench EFEP 187A and
torque wrench.
74 Install retaining plate (30), lockwasher (29), and screw
(28).
4-32
|
