|
| |
TM 5-4320-305-24
3-25. REPLACE/REPAIR FRAME (Continued)
WARNING
Before application of heat, such as open flame, torch, or arc welding, be sure that all traces of
cleaning solvent or flammable fluids or vapors are absent from the repair area.
4 Reweld cracked weldment. Thoroughly wire brush area to be repaired. Grind weld bead down to parent metal for the
length of the defect plus 0.25 inch (6.35 mm) on each side. Blend repair weld into original weld bead.
REPLACEMENT:
Install items listed under equipment condition onto repaired or new frame.
3-129/(3-130 blank)
|
