|
| |
TM 5-4320-305-24
3-22. REPLACE/REPAIR FRONT COVER (Continued)
2
Work shaft seal (1) loose, remove and discard.
3
Remove the oil filler cap (2) and washer (3) from the oil filler neck (4) of the front cover (5).
4
Remove bolts (6) and nuts (7) that secure rear engine supports (8) to support bracket (9).
5 Remove screws (10), lockwashers (11), and washers (12) that secure support bracket (9) to front cover (5). Remove
support bracket.
6
Remove bolts (13) and washers (14), and remove front cover (5) from engine.
3-120
|
