|
| |
TM 5-4320-305-24
3-11.
REPLACE/REPAIR OIL PUMP ASSEMBLY (Continued)
6
Place new preformed packing (15) on the end of hydraulic pipe (14) and slide pipe with assembled oil pump into the
lube oil inlet port of the crankcase. Be sure the preformed packing seats properly to provide a seal.
7
Using screw (12) secure the assembled yoke spring (13), oil pump (7), and hydraulic pipe (14) to the crankcase. Do
not tighten screw.
8
Using screw (8) and spring lockwasher (9), secure shield (10) and washer (11) to oil pump (7), and the pump to the
crankcase. Do not tighten screw.
3-57
|
