|
| |
TM 5-4320-305-24
2-23. REPLACE ETHER START KIT (Continued)
REMOVAL:
1 Remove cylinder (1) by unscrewing from valve (2). Remove gasket (3).
2 Unscrew adapter (4) from air intake.
3 Remove two screws (5). Remove bracket (6) and valve (2).
4 Unscrew hose (7) from adapter (4) and valve (2)'.
INSPECTION:
1 Inspect hose (7) for cracks. Replace if damaged.
2 Inspect valve (2), cylinder (1), and adapter (4) for heavy corrosion, dents, or damaged threads. Replace if damaged.
INSTALLATION:
1 Install hose (7) by screwing into adapter (4) and into valve (2).
2 Install valve (2) and bracket (6) using two screws (5).
3 Install gasket (3) and screw cylinder (1) onto valve (2) hand tight. Do not tighten the cylinder (1) more than hand tight.
4 Install adapter (4) into air intake.
2-93
|
