|
| |
TM 5-4320-305-10
2-7.
PREPARATION FOR MOVEMENT
a.
Shut down the centrifugal pump unit according to paragraph 2-6.h.
b.
Be sure suction assembly and discharge manifold assembly gate valves (1 and 2) are closed.
c.
Drain the discharge hose before disconnecting it from the discharge manifold assembly victaulic coupling
flange (3) (outlet). If the centrifugal pump unit has been used to pump fuel, drain the discharge hose into a suitable
container.
d.
Remove suction hose from the suction assembly victaulic coupling flange (4) (inlet).
e.
Remove discharge hose from the discharge manifold assembly victaulic coupling flange (outlet).
f.
Cover the vicaulic coupling flanges (inlet and outlet) to keep debris from entering the pump.
g.
Disconnect rod cable assemblies (1). Remove ground rods (2) from the earth. Stow cable assemblies in
tool box. Stow ground rods.
Change 1 2-75
|
