|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-9. REPLACE CRANK ASSEMBLY GEARS
This task covers:
a. Removal
c. Assembly
b. Cleaning/Inspection
INITIAL SETUP
Tools
General Safety Instructions
Shop set, automotive repair,
field maintenance, basic
Well-ventilated area required.
Materials/Parts
Diesel fuel oil (Item 2, Appendix E)
Grease (Item 3, Appendix E)
Grease (Item 4, Appendix E)
REMOVAL:
1
2
3
4
5
6
7
Remove four Allen screws (1) and remove
Remove and discard gasket (3).
housing (2).
Remove needle shell (4), oil seal (5), gear wheel (6), and stud (7) as an
Remove needle shell (4), oil seal (5), and stud (7) from gear wheel (6).
Remove disc (8).
Remove hexagon nut (9) and spring washer (10).
Remove pinion (11).
assembly.
5-22
|
