|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-8. TEST/REPLACE/ADJUST INJECTION PUMP (Continued)
Before starting the engine and after making repairs or adjust-
ments on the fuel system, a 17 mm wrench must be available
to allow rapid removal of the steel fuel line at the injection
pump in case of a runaway condition. Failure to heed this
warning can result in injury to personnel and equipment
damage.
17 Install fuel filter, fuel hoses, and hose clamps as described in INSTALLATION steps 5, 6, 7, 8, and
9 of paragraph 4-17.
18 Remove fuel shutoff clamp 668 383 00 from fuel hose.
19 Install engine adapter housing.
5-21
|
