|
|
interior, and damaged quick-disconnect fittings on
system of the equipment being serviced. A
the hose ends. Replace the hose if damaged.
grounding wire with an alligator clip and telephone-
b. Inspect the discharge hoses for cracks, cuts,
type plug is provided to facilitate grounding of the
punctures, deteriorated rubber, severe abrasions,
nozzle to prevent static sparks from igniting the fuel
and damaged quick-disconnect fittings at the hose
being pumped.
ends. Replace damaged discharge hoses.
a. Inspect the suction hose for cracks, cuts,
a. Disassembly. Disassemble the discharge
punctures, collapsed walls, loose fabric in the hose
nozzle as shown in figure 4-12. Note the following:
13.
Disk washer
KEY to fig. 4-12:
14.
Nut
15.
Stem
1.
Grounding wire assembly
16.
Cotter pin
2.
Cap
17.
Pin
3.
Spring
18.
Operating lever
4.
Chain
19.
Packing nut
5.
S-hook
20.
Packing gland
6.
Spout
21.
Packing
7.
Screen
22.
Stuffing box
8.
Body cap
23.
Plug
9.
Spring
24.
Gasket
10.
Upper poppet
25.
Adapter
11.
Disk holder
26.
Body
12.
Disk
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |