Figure 1-1. Centrifugal pump, right side view.

Figure 1-1. Centrifugal pump, right side view.

Federal Stock Number ... 4320-063-7368

automatic overflow shutoff in the fuel tank (fig. 1-4)

Part No. ......................... 13207E9323

permits continuous operation.

Contract Number............ DAAK01-67-C-A669

c. Pump.

The Patterson Centrifugal Pump

Shipping Weight............. 7,200 pounds

Assembly is a 2-stage, 6-inch petroleum pump (fig. 1-2)

Length............................ 12' 11"

series rated at 500 8pm at 555-ft. head, or 1,400 8pm

Width ............................. 3' 2"

at 276-ft. head; parallel rated at 900 8pm at 275-ft.

Height ............................ 6' 10 % "

head, or 2,000 8pm at 225-ft. head. An intake valve

Manufactured by ............ John Reiner & Co., Inc.

(fig. 1-2) and discharge valve (fig. 1-1) are mounted on

(2) Engine plate.

the pump to enable measurement of the intake and

discharge pressures.

Eng. Mfr. ....................... Continental Motor Corp.

Model............................. RS633

Spec .............................. 6008

1 4. Identification and Tabulated Data

Tappet Clearance........... Exhaust 0.024 Intake 0.018

Rated Horsepower.......... 142

a. Identification. The centrifugal pump has two

At full load speed ........... 2,200 rpm.

major identification plates. The information on these

b. Tabulated Data.

plates is listed below.

(1) General.

(1) Unit plate.

Manufacturer.................. John Reiner & Co., Inc.

Nomenclature................. Pump, Centrifugal, GED 600

Model............................. GP 110-6

GPM at 655 foot head 2100

Type............................... Portable Gasoline Engine

RPM 1,400 GPM at 275

Driven

foot

Serial Number ................ 19250

(through

19337),

head 2100 RPM

19660,

Model............................. GP 110-5

19561

Year of Manufacture....... 1968

Mount............................. Skid

1-2