|
|
Section IV. REMOVAL AND INSTALLATION OF MAJOR
COMPONENTS OR AUXILLIARIES
(1)
Refer to figure 335 and remove pump
5-20. General
assembly.
The centrifugal pump contains three major units which
(2) Refer to paragraph 3-81b and remove the lifting
may be removed from the skid base assembly in order
bail.
to ease the performance of repair procedures. These
(3) Disconnect the battery cable which runs to the
units are: the pump assembly, the engine, and the
battery disconnect switch.
engine housing. Remove only those parts necessary for
(4) Refer to figure 5-1 and finish removing the
the removal of the component requiring maintenance or
engine and housing assembly.
repair.
b. Installation. Install engine and housing assembly in
reverse order of removal.
5-21. Pump Assembly
5-23. Housing
pump assembly.
a. Removal. Refer to figure 3-57 and remove the
b. Installation. Refer to figure 8-35 and install the
housing.
pump assembly.
b. Installation. Refer to figure 3-57 and install the
housing.
5-22. Engine and Housing Assembly
a. Removal.
5-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |