|
| |
TM 5-4320-228-13&P
2-4.4 Installation or Setting-Up Instructions.
a.
General.
The pump is shipped assembled for operation.
b.
Installation.
(1) Place pump on a base that is solid and strong enough to
support weight of unit.
Refer to 1-9 for dimensions of base.
(2) Select a level site where there will be enough space on
all sides for servicing and operation of the unit.
(3) Place pump as close as possible to source of water.
Avoid long suction lifts which reduce pumping efficiency.
(4) Connect hoses to inlet and outlet adapters. Make sure
intake end of inlet hose is connected.
(5) If pump is operated in enclosed area, make certain that
there is proper ventilation and exhaust gases are piped outside.
Never operate pump in enclosed areas unless
exhaust gases are piped outside.
Exhaust
gases contain carbon monoxide, a colorless,
odorless, and poisonous gas, which can cause
serious illness or death.
2-7
|
