|
| |
TM 07661B-14/1
APPENDIX A
A 3-26. REMOTE HOSE REEL.
a.
Removal.
(1)
Uncouple inlet hoses (1, figure 3-15 at rear of cart. Disconnect inlet hoses (1) and nipples (2) from swivel
joints (5) at each side of hose reel.
(2)
To lessen weight of hose reel, it is recommended that the twin handline assembly (3) should be removed
from the hose reel. See instructions, paragraph 3-24a.
(3)
Remove mounting u-bolts and j-bolts, lockwashers, and nuts (4 and 6). Lift hose reel from cart with
suitable lifting device.
b.
Installation.
(1)
Position hose reel on cart, with crank on left as viewed from handle end. install mounting u-bolts and j-
bolts, lockwashers, and nuts (4 and 6) as shown, figure 3-15. Tighten securely.
(2)
Seal threads of nipples (2) using instructions in NOTE, paragraph 3-14c, then install inlet nipples (2) and
hoses (1). Recouple inlet hoses at rear of cart.
(3)
Install twin handline (3), same as main hose reel, per instructions in paragraph 3-24b.
Figure A 3-15. Hose Reel Replacement - Cart
A 3-34
|
