|
| |
TM 10-6630-247-13&P
2-7. ASSEMBLY AND PREPARATION FOR USE - cont.
(10) Install slow speed stirrer as follows: Refer to figure 2-8.
(a)
Place clamp (1) through mounting hole in bottom of slow speed stirrer (2).
(b)
Position slow speed stirrer (2) and clamp (1) on support rod (3).
NOTE
Adjust position of slow speed stirrer as required to maintain correct
alinement and fit of belt with pulleys.
(c)
Align top pulley (4) on slow speed stirrer (2) with pulley (5) on cover assembly (6),
then tighten clamp (1).
(d)
Install belt (7) between pulleys (4 and 5)”
(e)
Connect electrical cord (8) to power cable (9).
Figure 2-8. Slow Speed Stirrer.
2-19
|
