|
| |
TM 10-5430-242-12&P
0008 00
Change 1
0008 00-8
TROUBLESHOOTING PROCEDURE
BERM LINER DRAIN FITTING ASSEMBLY
SYMPTOM
Drain fitting assembly leaks between drain fitting and berm liner.
MALFUNCTION
Check for missing or loose washers and hex head cap screws.
CORRECTIVE ACTION
Replace missing screws or washers. Torque the fastening
hardware to 15 or 16 ft-lb (20.34 or 21.70 N m). See WP 0033
00 for GTA Models, check the gaskets between the male
disconnect coupling and the berm liner for nicks, breaks, and
tears. See WP 0032 00 for Reliance Models, check the
preformed packing between the drain cover plate and the tank
fitting for nicks, breaks, and compression. For MPC Models,
check the 90º elbow fitting for nicks, breaks, and compression.
CORRECTIVE ACTION
Replace the gaskets or o-ring. See WP 0032 00 (Reliance
Model) or WP 0033 00 (GTA Model).
Replace the 90º elbow, gaskets, or o-ring. See WP 0033 01
(MPC Model).
TROUBLESHOOTING PROCEDURE
BERM LINER DRAIN HOSE ASSEMBLY
SYMPTOM
Drain hose assembly does not drain properly.
MALFUNCTION
Check for dirt, grime, cracks or wear.
CORRECTIVE ACTION
Service the drain hose. See WP 0031 00.
END OF WORK PACKAGE
|
