|
| |
TM 10-5430-242-12&P 0033 00
0033
00-2
3. Inspect all mechanical partsInspect all mechanical parts for cracks, dents, breaks, and wear.
Replace the component if unserviceable.
ASSEMBLY
1. Lubricate new gaskets (9) with silicone compound.
2. Place one gasket (9) on male disconnect coupling (2). Position other gasket (9) on strainer (10) of
berm liner (8).
3. Position male disconnect coupling (2) on berm liner (8) and align the fastening holes.
4. Install male disconnect coupling (2) to berm liner (8) with eight screws (6) and washers (7), by hand
tightening screws (6).
5. Torque all screws (6) to 16 ft-lb (21.70 N m).
6. Install dust cap (3) and new gasket (5) to male disconnect coupling (2). Push inward on cam-lever
arms (4) to lock dust cap (3) onto male disconnect coupling (2).
7. Attach chain assembly (1) to male disconnect coupling (2) and dust cap (3).
END OF WORK PACKAGE
3
7
4
6
5
1
2
8
9
10
|
