BERM LINER DRAIN HOSE ASSEMBLY (TANK MODEL GTA-210KF) SERVICE AND REPAIR

TM 10-5430-239-12&P

0029 00

OPERATOR AND UNIT MAINTENANCE MANUAL

(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

COLLAPSIBLE FABRIC TANK, PETROLEUM, 5,000 BARREL

BERM LINER DRAIN HOSE ASSEMBLY (TANK MODEL GTA-210KF)

SERVICE AND REPAIR

INITIAL SETUP

Materials/Parts

Equipment Condition

Detergent

Berm liner drain ball valve removed

Dry Cleaning Solvent

Rags, Wiping

WARNING

FLAMMABLE FUEL. Do not allow smoking within 100 feet (30.50 meters)

of the storage area. Post NO SMOKING signs around the area. Avoid

getting fuel on the body or clothing. If clothing becomes saturated with

fuel, remove the clothing immediately and wash body with hot soapy water

and soak clothing in soapy water. Avoid spillage of fuel. When spillage

occurs, cover the affected area with dry soil to reduce its rate of vaporization.

Be certain a suitable fire extinguisher is present and that it is properly

charged and positioned so as to be readily available in case of fire. Death or

serious injury may result if personnel fail to strictly observe safety precautions.

SERVICE

1. Pull outward on cam-lever arms (1) and remove berm liner drain hose assembly (2) from male

disconnect coupling (3).

2. Flush berm liner drain hose assembly (2) with hot, soapy water.

3. Rinse out berm liner drain hose assembly (2) thoroughly and air dry.

WARNING

Dry cleaning solvent, A-A-59601, used to clean parts, is potentially

dangerous to personnel and property. It produces toxic and flammable

fumes. Use only in well ventilated areas. Avoid repeated and prolonged

skin contact. Do not use solvent near an open flame or near excessive

heat. The flash point of the solvent is 100F to 130F (38 C to 59 C).

CAUTION

Dry cleaning solvent, A-A-59601, used to clean parts, must not come into

contact with any part of the fuel tank fabric. Damage to the fabric will

occur.

4. Clean the end of male disconnect coupling (3) with dry cleaning solvent and dry thoroughly with rags.

5. Inspect berm liner drain hose assembly (2) for cracks, tears or wear.

0029 00-1