 |
|||
|
|
|||
|
Page Title:
TEE ASSEMBLY (TANK MODELS BA91-142 AND RCF0210000) SERVICE AND REPAIR |
|
||
| ||||||||||
|
|
 TM 10-5430-239-12&P
OPERATOR AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
COLLAPSIBLE FABRIC TANK, PETROLEUM, 5,000 BARREL
TEE ASSEMBLY (TANK MODELS BA91-142 AND RCF0210000)
SERVICE AND REPAIR
INITIAL SETUP
Tools
Mandatory Replacement Parts
Tool Kit, General Mechanics
Gasket
(Item 1, WP 0034 00)
(Item 5, WP 0044 00)
Torque Wrench (ft-lb)
Gasket, Flange
(Item 3, WP 0034 00)
(Item 4, WP 0044 00)
Lockwasher
Materials/Parts
(Item 9, WP 0044 00)
Dry Cleaning Solvent
(Item 5, WP 0041 00)
Rags, Wiping
(Item 8, WP 0041 00)
WARNING
FLAMMABLE FUEL. Do not allow smoking within 100 feet (30.50 meters)
of the storage area. Post NO SMOKING signs around the area. Avoid
getting fuel on the body or clothing. If clothing becomes saturated with
fuel, remove the clothing immediately and wash body with hot soapy water
and soak clothing in soapy water. Avoid spillage of fuel. When spillage
occurs, cover the affected area with dry soil to reduce its rate of vaporization.
Be certain a suitable fire extinguisher is present and that it is properly
charged and positioned so as to be readily available in case of fire. Death or
serious injury may result if personnel fail to strictly observe safety precautions.
DISASSEMBLY
1. Remove seven key rings (1) from two dust caps (2), dust plug (3) and female coupling half (4).
2. Pull outward on two cam-lever arms (6) and remove dust cap (2) from male coupling half (7).
Remove gasket (8) from inside dust cap (2). Discard gasket (8).
3. Remove twelve screws (9), washers (10), one end of chain (5), lockwashers (11) and nuts (12) from
coupling half (7) and tee (13). Remove coupling half (7) and flange gasket (14). Discard gasket (14).
4. Repeat steps two and three to remove other dust cap (2) and male coupling half (7).
5. Pull outward on two cam-lever arms (15) and remove dust plug (3) from female coupling half (4).
Remove gasket (16) from inside female coupling half (4). Discard gasket (16).
6. Remove twelve screws (17), washers (18), one end of chain (5), lockwashers (19) and nuts (20) from
coupling half (4) and tee (13). Remove coupling half (4) and flange gasket (21). Discard gasket (21).
0028 00-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals