|
|
TM 10-5430-239-12&P
0027 00
ASSEMBLY
NOTE
For GTA Model, skip steps 1 thru 5.
1. Position new gasket (12) on valve housing (11). Align bonnet (10) on valve housing (11).
2. Install ten bolts (7), new lockwashers (8) and nuts (9). Hand tighten using a ten bolt-tightening
pattern. Torque bolts (7) to 10 ft-lbs (13.56 Nm).
3. Install spring (5) and packing gland (6) on valve stem (3).
4. Install packing nut (4) on valve stem (3) by manually pushing packing nut (4) down on
bonnet (10).
5. Install hand-wheel (2) and jam nut (1) on valve stem (3).
1
2
4
5
6
7
8
10
3
12
11
9
0027 00-5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |