VENT FITTING ASSEMBLY COUPLING AND DUST CAP GASKET REPLACEMENT

TM 10-5430-239-12&P

0012 00

OPERATOR AND UNIT MAINTENANCE MANUAL

(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

COLLAPSIBLE FABRIC TANK, PETROLEUM, 5,000 BARREL

VENT FITTING ASSEMBLY COUPLING AND DUST CAP GASKET

REPLACEMENT

INITIAL SETUP

Mandatory Replacement Parts

Gasket

WARNING

FLAMMABLE FUEL. Do not allow smoking within 100 feet (30.50 meters)

of the storage area. Post NO SMOKING signs around the area. Avoid

getting fuel on the body or clothing. If clothing becomes saturated with

fuel, remove the clothing immediately and wash body with hot soapy water

and soak clothing in soapy water. Avoid spillage of fuel. When spillage

occurs, cover the affected area with dry soil to reduce its rate of vaporization.

Be certain a suitable fire extinguisher is present and that it is properly

charged and positioned so as to be readily available in case of fire. Death or

serious injury may result if personnel fail to strictly observe safety precautions.

NOTE

Vent pipe, relief cap, and flame arrestor removed for clarity.

REMOVAL

1. Disconnect female quick-disconnect coupling (1) from male-flanged adapter (2) by pulling outward on

cam-lever arms (3). Lift female quick-disconnect coupling (1) from male-flanged adapter (2).

2. Remove female quick-disconnect coupling gasket (4). Discard gasket (4).

3. Remove gasket (5) from inside dust cap (6). Discard gasket (5).

0012 00-1