OPERATING AUXILIARY EQUIPMENT - TM-10-5430-239-12-P0043

TM 10-5430-239-12&P

0005 00

Draining Tank

1. Empty fuel from tank following procedures for discharging fuel.

2. Pump out tank as completely as possible. Open drain gate or ball valves.

3. Fold sides of tank toward middle. Roll end of tank farthest from the lowest drain assembly toward the

drain to squeeze out residual fuel.

OPERATING AUXILIARY EQUIPMENT

NOTE

Model GTA-210KF does not have a tee assembly.

Operation with Tee Assembly (Models BA91-142 and PD5430-0001)

The tee assembly is used to fill or empty more than one tank without disconnecting and reconnecting

lines.

1. Connect the tee assembly straight run male quick-disconnect (Q-D) coupling to tank #1 gate valve

female Q-D coupling.

2. Connect other tee assembly male Q-D coupling to tank #2 gate valve female Q-D coupling.

3. Connect service line to the tee assembly female Q-D coupling.

4. Remove dust cap prior to connecting service line to target tank.

5. Operate gate valves as necessary to perform tank fill or discharge operations.

0005 00-15