FILLER/DISCHARGE ASSEMBLY ELBOW AND DUST CAP GASKET REPLACEMENT

TM 10-5430-238-12&P

0013 00

OPERATOR AND UNIT MAINTENANCE MANUAL

(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,

10,000, 20,000, AND 50,000 GALLON

FILLER/DISCHARGE ASSEMBLY ELBOW AND DUST CAP GASKET

REPLACEMENT

INITIAL SETUP

Mandatory Replacement Parts

Gasket

REMOVAL

1. Remove elbow (1) or dust cap (2) by pulling outward on cam-lever arms (3), and lifting elbow (1) or

dust cap (2) from flanged adapter (4).

NOTE

Fill end female/female elbow has two gaskets.

2. Remove gasket (5) from elbow (1) and gasket (6) from dust cap (2). Discard gaskets (5) and (6).

INSTALLATION

NOTE

Fill end female/female elbow will require two new gaskets.

1. Place new gasket (5) into elbow (1) and new gasket (6) in dust cap (2).

2. Install elbow (1) onto flanged adapter (4), by pushing inward on cam-lever arms (3) to lock elbow (1)

into position.

3. Install the dust cap (2) onto the elbow (1) by pushing inward on the cam-lever arms (3) on dust cap (2)

to lock into position.

END OF WORK PACKAGE

0013 00-1/2 blank