Installation of Vent Pipe Assembly-continued

TM 10-5430-238-12&P

0005 00

NOTE

Normally the vent pipe and female coupling half will be received pre-assembled.

3. Inspect female coupling half (4) and vent pipe (5) for cleanliness.

4. Check to see that relief cap (6) operates freely.

5. Check that flame arrestor (7) is installed.

6. Check that relief cap (6) is installed tightly on vent pipe (5).

7. Check that gasket (8) is in place and correctly seated.

8. Insert female coupling half (4) over flanged adapter (9), with cam-lever arms (10) in the outward

position.

9. Press cam-lever arms (10) upward, and inward, to lock vent pipe (5) into operating position.

0005 00-10