BERM CROSS-SECTION - TM-10-5430-238-12-P0032

TM 10-5430-238-12&P

0005 00

BERM CROSS-SECTION

LIQUID LEVEL

NOTE: When a single berm is used to

contain more than one tank, maintain a

5.0-foot (1.5 meter) space between tanks.

Typical Berm Cross-Section of Liquid Level in Relation

to the Position of the Collapsible Fabric Fuel Tank.

Unpacking the Equipment

1. Position the packaged tank (1) on an approved site near the point of installation.

CAUTIONS

Unfold the collapsible fabric tanks with care. Coated surfaces may stick together,

and use of excessive force may pull the coating from the tank fabric. A light

application of petroleum jelly will prevent recurrence.

Remove all protruding nails and other objects before attempting to remove the

tank from the container. This is necessary to avoid puncturing the tank.

2. Know the contents of the shipping container by reviewing the Bill of Materials.

NOTE

Items inside the wooden crate are listed sequentially from the top of the crate

to the bottom of the crate.

ITEM

QUANTITY

Hoses

Three (3) each

Tank, with lifting straps

One (1) each

Partition containing accessories

One (1) each

Emergency repair items.

3. Carefully open the shipping container (2) and by removing nails and bolts from the container lid (3),

retaining boards (4), container sides (5) and ends (6). Remove accessories (7), drain fitting hoses (8),

and filler/discharge hose (9) from around tank (1).

0005 00-6