TM 10-5430-237-12&P                                                 0009 00 0009 00-4 ITEM NO. INTERVAL MAN- HOUR ITEM TO BE CHECKED OR SERVICED PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: 14 Before Ball Valve and Fittings (18) (Models 3-K-W- O-A/Z and GTA-Z60TPW) Inspect for damage, leakage or loose and frozen valve. Valve or fittings are damaged or leaking. Valve is frozen. 15 Before Automotive Valves (14) (Models 90074/ 91038/WT2008 only) Inspect valves for damaged valve core or stem. Valves are damaged. 16 Before Ground Cloth (15) (Models 90074/3-K-W- O-A/Z/91038) Ground Cloth/Valise (Model GTA- Z60TPW) Inspect spread out ground cloth for evidence of debris or covered debris that could damage tank. Inspect cloth for through holes that allow the tank to have direct contact with the ground. Ground cloth or ground cloth/ valise is damaged. 17 During Tank Envelope (1) Inspect for cuts, punctures and leaks. Envelope is cut, punctured or leaking.   18 During Fill/Discharge Fittings (2 & 3) Inspect for damage, leakage, loose or missing bolts. Fittings are damaged, leaking or loose. Bolts missing. 19 After Reinforcing Fittings (6) Inspect threaded holes for damaged threads. Check that fittings are securely bonded to tank. Fittings are damaged or separated from tank. 20 After Handle Toggles (9) (Models 90074/91038/ WT2008 only) Inspect handles for cuts or other damage. Inspect rope for cut or frayed condition. Toggles are damaged. 21 After Inflation Valves (10) (Models 90074 and 91038 only) Inspect for loose or damaged screw or other damage. Ensure valves can be rotated to both the open and closed positions. Valves are damaged. 22 After Deflation Valve (17) (Model WT2008 only) Inspect for loose or damaged screw or other damage. Ensure valves can be rotated to both the open and closed positions. Valves are damaged.