TM 10-5430-237-12&P                                                 0009 00 0009 00-3 ITEM NO. INTERVAL MAN- HOUR ITEM TO BE CHECKED OR SERVICED               PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: 4 Before Cover (4)   Inspect for cuts or punctures.   Model 3-K-W-O-A/Z has no cover. Cover is cut or punctured. 5 Before Float (12) Inspect for cuts or punctures. Check that float is secured to underside of cover. Model WT2008: Check that float is secured in the netting holder. Float is cut or punctured or separated from cover. Float separated from netting holder. 6 Before Lift Handles (7) and Straps (8) Inspect for cuts and tears. Check that handles and straps are secure. Lift handles or straps are damaged. 7 Before Handle- Toggles (9) (Models 90074/ 91038/WT2008 only) Inspect handle for cuts or other damage. Inspect rope for cuts or frayed condition. Handle-toggles are damaged. 8 Before Inflation Valves (10) (Models 90074 and   91038 only) Inspect valves for loose or damaged screws or other damage. Ensure valves can be rotated to both the open and closed positions. Valves are damaged. 9 Before Deflation Valves (17) WT2008: Inspect valves for loose or damaged screws or other damage. Valves are damaged. 10 Before Hand Pump (13) (Model 90074 only) Inspect hose for cuts or damaged fittings. Inspect pump for damaged fitting or preformed packing. Hand pump or fittings are damaged. Hose is cut or fittings damaged. Preformed packing damaged or missing. 11 Before Foot Bellows (16) (Models 91038 and WT2008) Inspect hose for cuts or damaged fittings. Inspect bellows for damaged fitting or o-ring, cut or punctured bellows. Bellows damaged to the point of being unusable. 12 Before Fill/Discharge Fittings (2 & 3) Inspect for damage, leakage, loose or missing bolts. Fittings are damaged, leaking or loose. Missing bolts. 13 Before Repair Kit (5) Check for missing components (Table 1, WP 0004 00). Ensure instruction sheet is present. Emergency repair items are missing.