|
| |
TM 10-5430-237-12&P
0007 00
0007 00-4
Check inflation valve (4) for damage.
CORRECTIVE ACTION
Notify unit maintenance for repair.
Check automotive valve (4A) for damage on Models 91038, 90074 and WT2008.
CORRECTIVE ACTION
Notify unit maintenance for repair.
Check cover float (5) for cuts or punctures.
CORRECTIVE ACTION
Notify unit maintenance for repair.
SYMPTOM
Cover float deflates after inflation.
MALFUNCTION
NOTE
If temperature has dropped considerably since the float was inflated, it will appear to
have lost air. Unless it is observed to lose additional air, the float is in operating
condition and does not have a leak. Do not inflate unless a leak is observed.
Check that inflation valve (4) was fully closed after cover float (5) was inflated.
CORRECTIVE ACTION
If inflation valve (4) was not fully closed, reinflate the cover float
(5) to proper psi of approximately 0.5 psi (3.4 kPa), making sure
to properly close valve after inflation.
Check inflation valve (4) for air leakage.
CORRECTIVE ACTION
Notify unit maintenance for repair.
Check automotive valve (4A) for air leakage on Models 91038, 90074 and
WT2008.
CORRECTIVE ACTION
Notify unit maintenance for repair.
Check cover float (5) for cuts or punctures.
CORRECTIVE ACTION
Notify unit maintenance for repair.
|
