|
| |
TM 10-5430-236-12&P
0021 00
0021 00-1
UNIT MAINTENANCE
DISCHARGE ASSEMBLY
REPLACEMENT AND REPAIR
INITIAL SETUP
Tools
General Mechanics Tool Kit
(Item 1, WP 0030 00)
Torque Wrench, 0-300 in-lb
(Item 2, WP 0030 00)
Materials/Parts
Detergent, General Purpose
(Item 3, WP 0034 00)
Rag, Wiping
(Item 2, WP 0034 00)
Silicone Compound
(Item 4, WP 0034 00)
Mandatory Replacement Parts
Gasket
(Item 9, WP 0037 00) (two required)
Performed Packing
(Item 7, WP 0037 00)
Lockwashers
(Item 5, WP 0037 00) (twelve required)
Preformed Packing
(Item 10, WP 0037 00)
Packing with Retainer
(Item 8, WP 0037 00) (twelve required)
General Safety Instructions
WARNING
Do not smoke within 100 feet (30.5m) of tanks.
Fuel is toxic to skin, eyes, and respiratory tract.
.
REMOVAL
Open locking arms (1) on discharge elbow (2). Separate discharge elbow (2) from flanged coupling (3).
DISASSEMBLY
1. Remove gasket (4) from discharge elbow (2). Discard gasket (4).
2. Remove twenty screws (5) and flat washers (6), dust cap (7) and chain (8) from compression plate (9).
3. Separate compression plate (9) and attached parts from tank compression fitting (10). Remove
preformed packing (11). Discard preformed packing (11).
4. Remove twelve nuts (12), twelve lockwashers (13) and suction stub (14). Remove twelve packings
with retainers (15) and twelve screws (16), flanged coupling half (3) and gasket (17) from compression
plate (9). Discard gasket (17), packings with retainers (15), and lockwashers (13).
5. Remove gasket (18) from dust cap (7). Discard gasket (18).
6. Remove chain assembly (8) and key holder (19) from dust cap (7).
CLEANING
1. Clean all components with clean water and detergent.
2. Rinse components in clean water and dry with wiping rag.
|
