| |
TM 10-5430-236-12&P
0025 00
0025 00-5/6 blank
ASSEMBLY - Continued
15. Pull cutting handle (1) on tool (2) to cut strapping (3),
16. Remove tool (2) while holding strapping stub (4) down on seal (5) with thumb.
17. Clinch end of strapping (3) by hammering down tabs (6) of seal (5) over strapping stub (4).
NOTES
Position adjacent strapping on hose next to the first strapping.
For the 6-inch (15.24cm) discharge hose assembly only, install another loop of strapping
on hose.
18. Repeat steps 1 through 4 for remaining strappings (3) on hose.
19. Install hose assembly (WP 0007 00).
20. Install drain valve (WP 0007 00).
END OF WORK PACKAGE
|