|
| |
TM 10-5430-236-12&P
0024 00
0024 00-1
UNIT MAINTENANCE
BERM LINER DRAIN FITTING ASSEMBLY
REPLACEMENT AND REPAIR
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
(Item 1, WP 0030 00)
Torque Wrench, 0-300 in-lb
(Item 2, WP 0030 00)
Equipment Condition
Berm liner removed (WP 0008 00).
Materials/Parts
Detergent, General Purpose
(Item 3, WP 0034 00)
Rag, Wiping
(Item 2, WP 0034 00)
Sealing Compound
(Item 1, WP 0034 00)
Silicone Compound
(Item 4, WP 0034 00)
Mandatory Replacement Parts
Gasket
(Item 2, WP 0037 00) (two required)
Preformed Packing
(Item 3, WP 0037 00)
General Safety Instructions
WARNING
Do not smoke within 100 feet (30.5m) of tanks.
Fuel is toxic to skin, eyes, and respiratory tract.
REMOVAL
1. Remove eight screws (1), and washers (2) from drain fitting (3).
2. Remove drain fitting (3) and preformed packing (4) from berm liner compression fitting (5). Discard
preformed packing (4).
3. Remove key holders (6) and chain (7) from coupling half (8) and dust cap (9).
4. Remove gasket (10) from dust cap (9). Discard gasket (10).
5. Remove coupling half (8) from drain fitting (3).
CLEANING
1. Wash all components with clean water and detergent.
2. Rinse components in clean water and dry with wiping rag.
INSPECTION
1. Inspect drain fitting (3) and compression fitting (5) for cracks, corrosion and stripped threads.
2. Inspect coupling half (8) for damaged threads.
3. Inspect chain (7) for damaged or broken links.
REPAIR
Replace damaged components.
|
