|
| |
TM 10-4930-248-13&P
4-2.
SPECIAL
TOOLS,
TMDE,
AND SUPPORT
EQUIPMENT.
Special tools, TMDE, and support equipment are listed in the Maintenance
Allocation Chart, Appendix B, and the
Repair Parts and Special Tools List (RPSTL), Appendix C of this TM.
4-3.
REPAIR
PARTS.
Repair parts are listed and illustrated in Appendix C of this manual.
Section II. UNIT PREVENTIVE
MAINTENANCE
CHECKS
AND SERVICES
4-4.
GENERAL
To ensure that the CCR Nozzle is ready for use at all times, it must be inspected systematically so that defects may be
discovered and corrected before they result in serious damage or equipment failure. The necessary preventive
maintenance checks and services to be performed are listed and described in Table 4-1. Defects discovered during
operation of the unit should he corrected as soon as possible. All deficiencies and shortcomings will be recorded,
together with the corrective actions taken, on DA Form 2404 (Equipment Inspection and Maintenance Worksheet) at the
earliest possible opportunity.
Table 4-1. Unit Preventive Maintenance Checks and Services (Model 64017B).
Item
Item to be
Interval
Procedures:
For Readiness Reporting
No.
Inspected
Check for and have
Equipment
is Not
Repaired
as Necessary
Ready/Available
if:
1
Strainer
Every
Check for foreign matter and holes.
Holes in strainer.
2 weeks
Clean and/or replace as required
(para. 4-10).
Iko
4-2
|
