|
| |
TM 10-4930-247-13&P
4-6. CHECKING UNPACKED EQUIPMENT.
a.
Unpacking Fuel System Equipment. Components of the HTARS are packaged and shipped in cardboard boxes or
crates. Where possible, save packaging materials for reuse. Use care when unpacking to prevent damage to
fragile components. This manual addresses installation and use of all components, but you may not need to
unpack all of them to perform your mission.
b.
Processing Unpacked Equipment.
(1)
Remove all tape, paper wrapping, plastic sheeting and packing materials from the HTARS components.
(2)
Inspect stencils, markings and information plates. All items should be clear and readable.
(3)
Inspect all components to make sure they are in serviceable condition.
(4)
Inspect the equipment for any damage incurred during shipment. If the equipment has been damaged,
report the damage on SF 364, Report of Discrepancy.
(5)
Refer to the TM10-4930-248-13&P for processing and servicing the CCR nozzle.
(6)
Check equipment against the packing slip to see if the shipment is complete. Report all discrepancies in
accordance with the instructions of DA Pam 738-750 or DA Pam 738-751 as applicable.
(7)
Check to see if the equipment has been modified.
4-3
|
