|
| |
TM 10-4930-247-13&P
2-13.
DECALS AND INSTRUCTION PLATES.
a.
CCR Nozzle. For decals and instruction plates on the CCR nozzle, refer to TM 10-4930-248-13&P.
b.
HEMTT Tanker. For decals and instruction plates on the HEMTT Tanker, refer to TM 9-2320-279-10-1.
2-14.
OPERATING AUXILIARY EQUIPMENT.
a.
CCR Nozzle. Instructions for operating the CCR nozzle are contained in TM 10-4930-248-13&P.
WARNING
Engine driven tankers must not be operated in enclosed areas unless exhaust
discharge is properly vented to the outside. Be alert at all times during operation
for odors and symptoms of carbon monoxide exposure.
b.
HEMTT Tanker. Instructions for operating the HEMTT tanker are contained in TM 9-2320-279-10-1.
2-15.
PREPARATION FOR MOVEMENT.
CAUTION
Never defuel the system without first isolating the CCR nozzle. Irreparable damage
to the diaphragm may result in an unserviceable nozzle.
a.
Ground Rod Removal. Refer to figure 2-17.
WARNING
Use care to prevent injury when removing ground rods. Wear gloves to protect
your hands. Do not hold ground rod below upper stop collar.
(1)
Disconnect ground clamp (1) (from CCR nozzle) from ground rod (2).
Figure 2-17. Ground Rod Removal.
Change 5 2-41
|
