|
| |
TM 10-4930-246-13&P
4-6.
CAMLOCK DISCONNECT ASSEMBLY REPLACEMENT AND REPAIR.
This task covers:
a. Removal
b. Disassembly
C. Repair
d. Assembly
e. Installation
INITIAL SETUP
Tools
Materials/Parts
Tool Kit, General Mechanics (Appendix B, Section III,
Dry Cleaning Solvent (Appendix F, Item 3)
Item 1)
Vise (Appendix B, Section III, item 3)
Rags (Appendix F, Item 4)
Pipe Wrench (Appendix B, Section III, item 3)
Petrolatum (Appendix F, Item 5)
Equipment Condition
Preformed packing (Appendix J, Item 1)
Gasket (Appendix J, Item 2)
Nozzle coupling disconnected from fuel supply hose.
Lock Wire (Appendix F, Section II, item 8) (Appendix
General Safety Requirements
J, item 12)
Lock Nuts (Appendix J, item 13)
Antisieze Tape (Appendix F, Section II, item 6)
Dry cleaning solvent is potentially dangerous
to personnel and property,
a. Removal
Remove six lock nuts (1), flat washers (2), screws(3), flat washers(4), camlock disconnect assembly (5),
and gasket (6). Discard lock nuts and gasket.
3
4
5
6
2
1
Figure 4-2.
Camlock Disconnect Assembly Removal
4-4
|
