|
| |
TM 10-4930-245-13&P
1-11. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
a.
Nozzle Housing. The Nozzle housing (1) contains the poppet assembly and pressure regulator.
b.
Nozzle Collar. The nozzle collar (2) mates with the vehicle receptacle. The locking lugs are housed and
actuated by the collar.
c.
Handle Assembly. The handle assembly (3) allows for manual ON/OFF control of the flow rate either no flow
or full flow.
d.
Strainer Housing. The strainer housing (4) houses the fuel strainer.
e.
Cover. A cover (5) is furnished to cover the nozzle outlet when not connected to a system for servicing.
f.
Ground Cable. A ground cable (6) is provided for grounding to the vehicle prior to connection. A ground
plug is provided for inserting into the vehicle ground receptacle. A clip type connector is used where a
ground plug receptacle is not available.
g.
Coupling Assembly. The coupling assembly (7) allows the nozzle assembly to be connected and
disconnected from a fuel servicing source.
1-4
|
