|
| |
TM 10-4930-242-13&P
Table 4-1. Unit Preventive Maintenance Checks and Services
Item
Interval
Location
Crew -member
Not Fully Mission Capable If:
No.
Item to Check/Service
Procedure
D-1 NOZZLE
ASSEMBLY
1
Every 2 Weeks
Strainer
Check for foreign matter
Holes in strainer.
and holes.
Proceed as follows:
a. Loosen screw (1) and
remove poppet (2) and
strainer (3) from nozzle
assembly (4).
b. Clean as required.
c. Insert strainer (3) and
poppet (2) into nozzle
assembly (4)
d. lighten screw (1).
Note: If strainer has holes,
reassemble per steps (c) and
(d) and notify Direct
Support Maintenance for
replacement.
4-2
|
