|
| |
TM 10-4930-242-13&P
CHAPTER 4
UNIT MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS AND SPECIAL TOOLS LIST
4-1. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
Refer to the Maintenance Allocation Chart contained in Appendix B for maintenance tasks authorized at unit level and for
the TMDE and support equipment required to perform these tasks.
4-3. REPAIR PARTS.
Repair parts are listed and illustrated in Appendix C, Unit and Direct Support Repair Parts and Special Tools List
(RPSTL).
Section II. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES
4-4. GENERAL.
To ensure that the D-l Nozzle is ready for use at all times, it must be inspected systematically so that defects may be
discovered and corrected before they result in serious damage or equipment failure. The necessary preventive
maintenance services to be performed are listed and described in Table 4-1. Defects discovered during operation of the
unit should be corrected as soon as possible. All deficiencies and shortcomings will be recorded, together with the
corrective actions taken, on DA Form 2404 (Equipment Inspection and Maintenance Worksheet) at the earliest possible
opportunity.
4-1
|
