| |
TM 10-4930-241-13
12-21. PREPARATION FOR MOVEMENT -CONT.
h.
Fuel System - Drum Filling Points to Refueling Points Removal. Refer to figure 2-49.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in
subzero temperatures. Always wear arctic mittens when handling components.
CAUTION
To prevent contamination of fuel system components use care when
disconnecting coupling to avoid getting ice, snow, dirt, sand and debris on
coupling mating surfaces or in hoses.
NOTE
Refer to para 2-16e for disconnect of quick disconnect couplings.
(1)
Disconnect arctic fuel and oil servicing nozzle (20) from collapsible hose (19)
(2)
Disconnect a 25 foot 1 1/2 inch collapsible hose (19) from reducer (18).
(3)
Disconnect reducer (18) from reducer (17).
(4)
Ensure coupling cap is installed in fueling manifold (16).
(5)
Disconnect female reducer (17) from fueling manifold (16).
(6)
Disconnect fueling manifold (16) from collapsible hose (15).
(7)
Disconnect a 25 foot collapsible hose (15 from fueling manifold (10).
(8)
Disconnect arctic fuel and oil servicing nozzle (14) from collapsible hose (13).
(9)
Disconnect a 25 foot 1 1/2-inch collapsible hose (13) from reducer (12).
(10)
Disconnect female reducer (12) from reducer (11).
(11)
Disconnect female reducer (11) from fueling manifold (10).
(12)
Disconnect fueling manifold (10) from collapsible hose (9).
(13)
Disconnect a 25 foot collapsible hose (9) from fueling manifold (4).
(14)
Disconnect arctic fuel and oil servicing nozzle (8) from collapsible hose (7).
(15)
Disconnect a 25 foot 1 1/2-inch collapsible hose (7) from reducer (6).
(16)
Disconnect female reducer (6) from reducer (5).
(17)
Disconnect female reducer (5) from fueling manifold (4)
2-99
|