|
| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT - CONT.
g.
Fuel System - Fuel Tank Bypass Hose Removal. Refer to figure 2-48.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
CAUTION
To prevent contamination of fuel system components use care when
disconnecting coupling to avoid getting ice, snow, dirt, sand and
debris on coupling mating surfaces or in hoses.
NOTE
Refer to para 2-16e for disconnect of quick disconnect couplings.
(1)
Disconnect one end of 4-inch hoses (1) from 4-inch valve section (4) on discharge side of fuel tank (5).
(2)
Disconnect 4-inch valve section (4) from discharge side of fuel tank (5)
(3)
Disconnect other end of 6-inch hoses (1) from 4-inch manifold (2).
(4)
Disconnect 4-inch manifold (2) from out put of primary 600 GPM pump (3).
(5)
Disconnect seven 25 foot 4-inch collapsible hoses (1).
Figure 2-48. Fuel System - Fuel Tank Bypass Hose Removal.
2-98
|
