| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT - CONT.
d.
Fuel System - Fuel Return Hoses Removal. Refer to figure 2-45.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
CAUTION
To prevent contamination of fuel system components use care when
disconnecting coupling to avoid getting ice, snow, dirt, sand and
debris on coupling mating surfaces or in hoses.
NOTE
Refer to para 2-16e for disconnect of quick disconnect couplings.
(1)
Disconnect one end of reducer (4) from 4-inch fueling manifold (5)
(2)
Disconnect other end of reducer (4) from end of noncollapsible hoses (1).
(3)
Disconnect noncollapsible hoses (1) from 6-inch fueling manifold (2) on input side of secondary 600 GPM
pump (3).
(4)
Disconnect 6-inch fueling manifold (2) from input side of secondary 600 GPM pump (3).
(5)
Disconnect the twelve 10 foot 6-inch noncollapsible hoses (1).
Figure 2-45. Fuel System - Fuel Return Hoses Removal.
2-95
|