|
| |
TM 10-4930-240-13
2-16. INITIAL ADJUSTMENT.
a. Hoses, Couplings and Valves.
(1) Verify that all quick disconnect coupling connections are secure.
(2) Verify that all valve sections are positioned with handwheels facing up and closed.
(3) Verify that caps and plugs are installed on all open components.
(4) Inspect fuel hoses for kinks, twists and tight bends. Straighten hoses as required.
b. 500 Gallon Collapsible Drums. Perform initial adjustments m accordance with TM 10-8110-203-
12&P.
c. 200 GPM Pump. Perform initial adjustments in accordance with TM 10-4320-342-10.
d. Filter Separator. Perform initial adjustments in accordance with TM 10-4330-23613.
e. CCR Nozzle and Gravity Fill Adapter. Perform initial adjustments in accordance with TM 10-4930-
243-13&P.
f. Single Point Refueling Nozzle (D1). Perform initial adjustment in accordance with TM 10-4930-242-
13&P.
g. Fire Extinguishers. Position fire extinguishers.
2-17. OPERATING PROCEDURES.
a General. The AFARE has two primary modes of operation, refueling and defueling. In the refueling
mode, fuel is removed from the 500 gallon collapsible drums and distributed to the refueling points
(nozzles). In the defuel mode, fuel is removed from the aircraft and stored in the 500 gallon
collapsible drums.
b 500 Gallon Collapsible Drum Operation. For procedures required to operate the 500 gallon collapsible
drums, refer to TM 10-8110-203-12&P.
c. 200 GPM Pump Operation. For procedures required to operate the 200 GPM pump, refer to TM 10-
4320-342-10.
d 200 GPM Filter Separator Operation. For procedures required to operate the 20OGPM filter separator,
refer to TM 10-4330-236-13.
e Single Point Refueling Nozzle (D1) Operation. For procedures required to operate the single point
refueling nozzle and gravity fill adapter, refer to TM 10-4930-242-13&P.
f CCR Nozzle and Gravity Fill Adapter. For procedures required to operate the CCR nozzle and gravity
fill adapter, refer to TM 10-4930-243-13&P.
2-51
|
