|
| |
TM 10-4930-240-13
4-42. STORAGE BOX ASSEMBLY REPAIR.
(13) Install identification plate (19) on container (10) with four rivets (17) and backup plates (18).
(14) Install strap webbing (16) on container (10) and secure with slide adapter (15). Repeat step for
remaining five strap webbings.
(15) Install separator divider (13) on lower panel (14) and secure with eight rivets (11) and backup plates
(12) and place in storage container (10).
(16) Install top panel (7) in upper frame (8) and secure with fifty four rivets (5) and backup plates (6).
(17) Install strike (4) on upper frame (8) and secure with two screws (3), lockwashers (2) and nuts (1).
Repeat step for remaining three strikes .
Figure 4-29. Storage Box (Panels and Frame) Repair.
4-83
|
