|
| |
TM 10-4930-240-13
4-35. ADAPTER ASSEMBLY REPAIR-cont.
b. Cleaning.
WARNING
Dry cleaning solvent, P-D-680, Type III, is potentially dangerous to personnel and
equipment. Eye and skin protection is required. Avoid repeated and prolonged
skin contact. Wash hands immediately after exposure. Do not use near open
flame or excessive heat. Use only in areas with good ventilation.
Using wiping rags and cleaning solvent, remove dirt and contaminants from all components.
c. Repair. Replace damaged or defective parts and all sealing components.
d. Assembly. Refer to figure 4-23.
(1) Apply thread sealant to male threads of male coupling half (8).
(2) Connect male coupling half (11) on male coupling half (8).
(3) Install gasket (12) in dust cap (10).
(4) Install dust cap (10) on male coupling half (11).
(5) Install gasket (9) in dust cap (7).
(6) Install dust cap (7) on male coupling half (8).
(7) Install chains (5 and 6) and three split rings (2, 3, and 4).
4-70
|
