|
| |
TM 10-4930-240-13
4-31. FUELING MANIFOLD SKID REPAIR.
Refer to para 4-20 for fuel manifold skid repair
4-32. TEE ASSEMBLY REPAIR.
This task covers:
a.
Disassembly
b.
Cleaning
c.
Repair
d.
Assembly
INITIAL SETUP:
Tools:
Material/Parts:
General Mech Tool Kit (App B, Sect III, Item 1)
Cleaning Solvent
(Item 1, App E)
Pipe Wrench (2 ea) (App B, Sect III, Item 5)
Wiping Rag
(Item 2, App E)
Vise (App B, Sect III, Item 2)
Thread Sealant
(Item 4, App E)
Equipment Condition:
Coupling Gasket
(Item 4, App J)
Tee assembly removed (para 2-20)
NOTE
Ensure that all parts identified as mandatory replacement parts are discarded and
replaced with new components.
a. Disassembly. Refer to figure 4-20.
NOTE
Disassemble tee assembly only the extent required to replace defective
component.
(1) Place tee assembly (1) in vise.
(2) Remove split rings (2 and 3) and chain (4).
(3) Remove dust plug (5) from female coupling half (7).
(4) Remove gasket (6) from female coupling half (7).
(5) Remove female coupling half (7) from tee (20).
(6) Remove split rings (8 and 9) and chain (10).
(7) Remove dust cap (12) from male coupling half (13).
(8) Remove gasket (11) from dust cap (12).
(9) Remove male coupling half (13) from tee (20).
(10) Remove split rings (14 and 15) and chain (16).
(11) Remove dust plug (17) from female coupling half (19).
4-59
|
