|
| |
TM 10-4930–238–12&P
4-13. HOSE ASSEMBLY, DISCHARGE.
This task consists of:
a. Removal
b. Repair
c. Installation
INITIAL SETUP:
Tools Required:
Banding Tool, Appendix B, Item 2
Tool Kit, General Mechanic’s, Appendix B, Item 3
Materials Required:
Seals, NSN 5340-00-244-7327
Strapping, NSN 5340-00-245-9440
Equipment Co nditions:
Forward Area Refueling Equipment
Ge neral Safety Instruction:
shutdown per para. 2-8 b.
Do not smoke or use an open flame in vicinity of the Forward Area Refueling
Equipment. Failure to comply may result in personnel injury.
a. Removal. Refer to Figure 4-6)
(1)
Pull upon camlock levers on discharge hoses (1) and closed circuit nozzles (3).
(2)
Remove discharge hoses (1) from wye fitting (2) and closed circuit nozzles (3).
Figure 4-6. Discharge Hoses, Removal/Installation.
4-12
|
